Quick Guide - CAS 126
Table of Content
Turning System ON and OFF
To Turn On
- Press the home screen and select a source to activate the projectors in the room.
-
The available sources are:
- PC- Desktop PC
- Laptop HDMI- HDMI or HDMI to USB-C Connection
- AirMedia - Wireless Connection
- Then press "show on left projector" and "show on right projector" to have them display.
- Different sources can be shown on each projector if needed.
To Turn Off
*Note: Please make sure to turn off the system before leaving the room.
- Press the EXIT button in the upper right on the screen.
- When it asks if you are sure you want to shut down, select "yes."
Connecting a Device
Room PC
- To use the PC dedicated to the room, make sure it is plugged in and on. It will display when "Room Computer" is the selected source
Personal Device
- To use your own laptop or other portable device, plug it into the HDMI cable and select "Faculty/User Laptop" as the source.
- If your device only has USB-C ports, you may need an adapter to use it with the HDMI connection. These are available at the MediaTech help desk.
Using AirMedia
Setting Up AirMedia
- To use the wireless connection, select the "AirMedia" source on the touch panel.
- An IP address will be visible in the lower left hand corner of the projection ("10.103._._")
- Enter this number into the web address area of Chrome or Firefox on the device you are connecting. This brings you to a page to download the AirMedia software.
- Once the software is downloaded and opened, a 4-digit number will appear on the projection.
- Enter this number into the box that pops up on your device. This connects the device image and sound to the monitor.
*If you have a MAC laptop, follow the same directions. After downloading the software, the AirMedia with corresponding room number will appear as a mirroring option. Select that to display your device.
Need More Help?
If you have any questions or need assistance, please contact the IT help desk.