Quick Guide - ARCH 104
Table of Content
Turning System ON and OFF
To Turn On
- Tap the touch screen to turn it on.
- In the Arch thesis room, you have the option of using just one projector/monitor, or both 104 and 105 rooms if using the whole space for one meeting. Select "Single Room" or "Combined"
Single Room
- Single room mode allows you to select laptop connection or wireless AirMedia connection, and route it to either the projector and/or the TV monitor
Combined Room
- Combined room mode allows you to send the signal from the USB-C cable or AirMedia in either 104 or 105 to any/all projectors and monitors in either room.
To Turn Off
*Note: Please make sure to turn off the system before leaving the room.
- Press the exit button on the touch panel.
- Then, confirm that you want to power the system down.
Connecting a Device
Personal Laptop
- Plug in your device using the USB-C cable in the room.
-
Once the laptop is plugged in, select "Single Room" or "Combined Room."
- Single will control one-half of the space.
- Combined will control both sides.
- When using combined, your laptop only needs to be connected to one side of the room, then, using the touch panel, you can send the signal to both projectors/displays.
AirMedia
- For AirMedia, connect the AirMedia adapter to your USB-C port. Then select "AirMedia" on the touch panel and either the projector or the display.
- If the adapter is not available, open Chrome or another browser and type in the IP address at the bottom of the screen (10.103...) Going to that page on your laptop will allow you to then connect to AirMedia using a 4-digit code that appears on the selected TV monitors and projectors.
Need Tech Help?
If you have any questions or need assistance, please contact the IT help desk.