Quick Guide - ARCH 105
Quick Guide - Arch Thesis Rooms
Arch 104/105 Classroom Guide
Technology Set-up: Laptop connection, Air Media, Mounted TVs, Divide/Combine Projection
Turn on/off the System
- In Arch Thesis you have the option of using just one projector/monitor, or both 104 and 105 rooms if using the whole space for one meeting. Select "Single Room" or "Combined."
Single Room mode allows you to select laptop connection or wireless Air Media connection, and route it to either the projector and/or TV monitor.
Combined mode allows you to send the signal from the USB-C cable or Air Media in either 104 or 105, to any and all projectors/monitors in either room.
Connecting Laptop
- Plug in your device using the USB-C cable in the room.
- Once the laptop is plugged in, select Single room or Combined room.
- Single will only control one-half of the space.
- Combined will control both sides
- When using combined, your laptop only needs to be connected to one side of the room, then using the touch panel, you can send the signal to both projectors and/or displays.
-
- For AirMedia, connect the AirMedia adapter to your USB-C port than select AirMedia on the touch panel and either the projector or the display.
- If the adapter isn't available, open Chrome or another browser and type in the IP address at the bottom of the screen (10.103...). Going to that page on your laptop will allow you to then connect to AirMedia using a 4 digit code that appears on the selected TV monitors and projectors.
To shut down the system press "exit" in the top right and then confirm that you want to power down.
Need Tech Help?
If you have any questions or need assistance, please contact the IT help desk.