Quick Guide - MNS 200
Table of Content
Turning System ON and OFF
To Turn On
- The room is controlled by a Creston panel on the teacher's desk.
-
The available sources are:
- PC- Desktop PC
- Laptop - HDMI Connection
- Laptop - VGA Connection
- Doc Cam - Document Camera
- BluRay Player - BluRay and DVD Discs
- AirMedia - Wireless Connection
- Use the "send to" buttons to display the source you selected.
*Note: If you change the source, you need to press the "send to" button each time.
- To display a disc, use either the PC disc drive with the VLC Media Player, or the Sony BluRay player.
To Turn Off
*Note: Please make sure to turn off the system before leaving the room.
- Press the "EXIT" button on the top right corner of the touch screen.
- When it asks if you are sure you would like to power the system down, press "YES."
Connecting a Device
Personal Laptop
- Laptops are connected via the HDMI cable coming out of the cubby.
- You may need an adapter to connect the cable if your laptop does not have an HDMI port. You can borrow one from the Media Tech help desk, located on the first floor of the University Library.
Document Camera
- If using the document camera, make sure the power button is ON and lit blue.
- Select it as the source on the Creston Panel.
Using AirMedia
Setting Up AirMedia
- To use the wireless connection, select the "AirMedia" source on the touch panel.
- An IP address will be visible in the lower left hand corner of the projection ("10.103._._")
- Enter this number into the web address area of Chrome or Firefox on the device you are connecting. This brings you to a page to download the AirMedia software.
- Once the software is downloaded and opened, a 4-digit number will appear on the projection.
- Enter this number into the box that pops up on your device. This connects the device image and sound to the monitor.
*If you have a MAC laptop, follow the same directions. After downloading the software, the AirMedia with corresponding room number will appear as a mirroring option. Select that to display your device.
Using Zoom
Setting up Zoom
- Remote Learning Instructions - QSys
On the room PC, Zoom can be accessed via the desktop icon or via Bridges. Please log in through the Single Sign On (SSO) when using the icon. It uses your Microsoft credentials. The room camera can be controlled from the Camera Controls button on the Crestron panel. You can pan and tilt the camera, as well as zoom in/out. The USB cable coming out of the cubby can be plugged into a laptop to connect the camera and mic to that device. In the zoom audio and video settings please make sure Echo Cancelling Speakerphone and Q-SYS Core 110f are selected.
Need More Help
If you have any questions or need assistance, please contact the IT help desk.