Quick Guide - MNS 213
Table of Content
Turning System ON and OFF
To Turn On
- Press the home screen and select a source to activate the projectors in the room.
-
The available sources are:
- PC- Desktop PC
- Laptop HDMI- HDMI or HDMI to USB-C Connection
- AirMedia - Wireless Connection
- Then press "show on left projector" and "show on right projector" to have them display.
- Different sources can be shown on each projector if needed.
To Turn Off
*Note: Please make sure to turn off the system before leaving the room.
- Press the EXIT button in the upper right on the screen.
- When it asks if you are sure you want to shut down, select "yes."
Connecting a Device
Room PC
To use the PC dedicated to the room, make sure it is plugged in and on. It will display when "Room Computer" is the selected source
Personal Device
- To use your own laptop or other portable device, plug it into the HDMI cable and select "_____" as the source.
- If your device only has USB-C ports, you may need an adapter to use it with the HDMI connection. These are available at the MediaTech help desk.
Using AirMedia
Setting Up AirMedia
- To use the wireless connection, select the "AirMedia" source on the touch panel.
- An IP address will be visible in the lower left hand corner of the projection ("10.103._._")
- Enter this number into the web address area of Chrome or Firefox on the device you are connecting. This brings you to a page to download the AirMedia software.
- Once the software is downloaded and opened, a 4-digit number will appear on the projection.
- Enter this number into the box that pops up on your device. This connects the device image and sound to the monitor.
*If you have a MAC laptop, follow the same directions. After downloading the software, the AirMedia with corresponding room number will appear as a mirroring option. Select that to display your device.
Need More Help?
If you have any questions or need assistance, please contact the IT help desk.